Shielded KSVPP-6 cable 4×2×0.57: four twisted pairs for security and fire alarm, access control and structured cabling with interference protection. Available across Uzbekistan.
от 7 210 сум
▸
Marking
КСВПП-6
🤖
Number of pairs
4
▸
Conductor cross-section
0,57 mm²
▸
Shield
Foil
Specifications
Marking
КСВПП-6
Number of pairs
4
💬
Need help choosing?
Our engineer will pick the right equipment for your needs and send a quote within 30 minutes.
The KSVPP-6 shielded signal cable in a 4×2×0.57 mm² configuration is designed for transmitting low-current signals in intrusion and fire alarm systems, access control and structured cabling networks. Four twisted pairs with a shield provide reliable protection against electromagnetic interference, maintaining signal stability over long lines. This is a solution for professional installation where transmission quality and connection durability are important.
Advantages
✓Shielding reduces electromagnetic interference and crosstalk between pairs
✓The 4×2×0.57 mm² configuration provides a cross-section margin for stable line operation
✓Pair twisting reduces the noise level and increases noise immunity
✓The KSVPP-6 marking complies with standard requirements for low-current cables
✓The flexible design simplifies laying in cable channels and trunking
✓Compatible with typical equipment of security and automation systems
Areas of application
✓Intrusion and fire alarm systems: laying loops and trunk lines
✓Access control and management systems: connecting readers and controllers
✓Structured cabling networks in administrative and commercial facilities
✓Warning and broadcasting systems: connecting peripheral devices
✓Industrial automation: transmitting control signals
Frequently asked questions
Is the KSVPP-6 cable suitable for laying in fire-hazardous areas?
The cable is designed for standard indoor laying; for fire-hazardous areas, a version with the ng index (non-flame-propagating) should be chosen.
Can this cable be used for video surveillance?
The cable is designed for low-current signal lines; for an analogue video signal, it is recommended to use a coaxial cable.
How to correctly connect the cable shield?
The shield is grounded on one side of the line, usually at the signal source or on the panel, to eliminate the formation of ground loops.
