Optical patch cord FC/APC SM, 20 m

PXT-PC-FC/APC-20m

Pixietech FC/APC SM optical patch cord, 20 m: extended single-mode cord with threaded FC and APC polish for spaced-out equipment. In stock.

87 090 UZS

Telegram WhatsApp

▸

Length

20 m

▸

Mode

single-mode (SM)

▸

Part number

PXT-PC-FC/APC-20m

▸

Connector A

FC/APC

Specifications

Length: 20 m
Mode: single-mode (SM)
Part number: PXT-PC-FC/APC-20m
Connector A: FC/APC
Connector B: FC/APC
Warranty: 1 year
Jacket: LSZH
Construction: simplex

The Pixietech FC/APC SM optical patch cord, 20 meters long, is an extended single-mode patch cord for connecting equipment spaced at a considerable distance. The FC connector with threaded locking and angled APC polish provides minimal back reflections and a reliable mechanical connection that is not disrupted by vibration and accidental loads. Twenty meters of flexible cable allow laying a route between racks or from a technical room to an adjacent one.

Advantages

A length of 20 meters allows connecting equipment located in different racks or separate rooms, without using intermediate distribution frames
The FC connector with a threaded lock reliably fixes the connection and prevents accidental disconnection
APC polishing minimizes back reflections — critically important for amplifiers and DWDM equipment
Single-mode fiber (SM) ensures signal transmission over distances used in single-mode systems
Factory-quality termination and protective caps included
1-year warranty from Pixietech

Applications

Telecommunication nodes: connecting equipment between racks in equipment halls
Data centers: direct switching lines between rows of racks
TV and radio transmission centers: connecting transmitters to the optical backbone
Industrial facilities: communication between remote control cabinets in a single building

Frequently asked questions

Won't the excess cable length cause problems with attenuation?

The additional attenuation over 20 meters of single-mode fiber is minimal and, as a rule, does not affect equipment operation; if necessary, the exact value is included in the link budget calculation.

How to correctly lay a long patch cord?

Excess cable is laid in loops with a bend radius no less than allowed (usually specified in the documentation); the cable must not be kinked and fasteners must not be over-tightened.

Can a patch cord be used as a permanent line in a cable duct?

Patch cords are intended for flexible switching; for permanent concealed installations it is better to use stationary cables with subsequent termination.

🛠Turnkey serviceStructured Cabling & LAN Installation in Tashkent, Uzbekistan — design and installation→

💬

Need help choosing?

Our engineer will pick the right equipment for your needs and send a quote within one business day.

Get a consultation →