Communication Cable KSVVEng 4x0.8 — buy in Tashkent
In stock
Communication Cable KSVVEng 4x0.8
Кабель КСВВЭнг 4х0,8
KSVVEng 4x0.8 communication cable: four 0.8 mm cores in an 'ng' design for security and fire alarm and building automation. Buy in Tashkent with warranty.
от 7 460 сум
▸
Marking
КСВВЭнг
▸
Number of cores
4
▸
Conductor cross-section
0,8 mm²
▸
Shield
Foil
Specifications
Marking
КСВВЭнг
Number of cores
4
💬
Need help choosing?
Our engineer will pick the right equipment for your needs and send a quote within 30 minutes.
KSVVEng 4×0.8 mm² cable is a shielded communication cable with four conductors of 0.8 mm diameter in the ng (flame-retardant) version. It is used in security and fire alarm systems, dispatching and building automation, where fire safety standards impose requirements on cable routes. The increased conductor cross-section provides low loop resistance over extended circuits.
Advantages
✓The ng version prevents flame propagation along the cable route in case of fire
✓Shielding protects signal lines from electromagnetic interference
✓Four conductors of 0.8 mm diameter provide low line resistance over long distances
✓Suitable for facilities with fire safety requirements for cable products
✓Widely used in the design of security and automation systems
✓Compatible with security and fire alarm equipment from various manufacturers
Applications
✓Security and fire alarm systems: laying loops and addressable lines
✓Notification and evacuation control systems: connecting control units and notification devices
✓Building automation and dispatching: laying interface lines
✓Administrative and public buildings: installation in compliance with fire safety requirements
✓Industrial facilities: signal and control lines in fire-hazardous zones
Frequently asked questions
What does the ng index in the cable marking mean?
The ng index means that the cable sheath does not propagate flame, which complies with regulatory requirements for laying in bundles at facilities with elevated fire safety requirements.
Can KSVVEng 4×0.8 be used for addressable fire alarm systems?
The cable is suitable for addressable systems; it is necessary to verify that the cross-section and line capacitance meet the requirements of the specific control and indicating equipment.
Is it mandatory to ground the cable shield?
Yes, the shield should be grounded at a single point for effective protection against interference without forming ground loops.
