PUGNP 2×0.5 signal cable: a flat two-core cable for low-current lines and security systems, convenient to run under skirting boards. In stock in Tashkent.
от 3 220 сум
▸
Marking
ПУГНП
▸
Number of cores
2
▸
Conductor cross-section
0,5 mm²
▸
Shape
Flat
Specifications
Marking
ПУГНП
Number of cores
2
Conductor cross-section
💬
Need help choosing?
Our engineer will pick the right equipment for your needs and send a quote within 30 minutes.
PUGNP 2×0.5 signal cable is a flat two-conductor cable for installing low-voltage circuits, signal lines and non-power connections in security systems. Thanks to its flat shape, it is especially convenient for laying under baseboards, in hard-to-reach places and where the use of round cable is difficult. The 0.5 mm² cross-section ensures reliable signal transmission over standard design distances.
Advantages
✓The flat design allows the cable to be laid under baseboards and in narrow gaps
✓The 0.5 mm² cross-section reduces the voltage drop over extended sections
✓The compact profile simplifies concealed laying without chasing walls
✓PVC insulation provides the necessary mechanical protection of the conductors
✓Suitable for connecting sensors, buttons and other low-load devices
✓An economical option for facilities with a large number of signal points
Applications
✓Signal loops of security and fire alarm in residential and commercial buildings
✓Laying low-voltage lines under baseboards and in areas with limited space
✓Connecting alarm buttons, opening sensors and other peripherals
✓Installation in offices, apartments and small retail facilities
Frequently asked questions
How does the flat PUGNP cable differ from the round KSPV?
The main difference is the shape of the sheath. The flat PUGNP is more convenient where you need to hide the cable under a baseboard or in a narrow gap without chasing.
Can PUGNP 2×0.5 be laid by the open method?
Yes, the cable allows open laying along walls and ceilings, however in places of mechanical impact a protective cable channel is recommended.
Is the cable suitable for connecting intercom call panels?
PUGNP 2×0.5 is suitable for signal lines of intercom systems with low current consumption. For powering panels with a high load, use a cable with a larger cross-section.
