ZKTeco FBL500 flap barrier
High-throughput ZKTeco flap barrier for business centers, stations and large offices. The flaps retract into the housing; passage is confirmed by card, QR code or biometrics.
This equipment is supplied per project: the price depends on configuration and volume. We will send a quote within one business day.
- Weight, kg
- 100
- Power
- AC 100–120 V / 200–240 V, 50/60 Hz
- Humidity
- 5% to 90%
- Dimensions, mm
- 1360 * 280 * 980 (L * W * H)
- Housing material
- SUS304 stainless steel
- Passage width, mm
- 600
- Operating temperature
- -20°C to 60°C
- Operating conditions
- indoor / outdoor (if sheltered)
The ZKTeco FBL500 speed gate (flap barrier) is designed for sites with heavy foot traffic: business centers, railway stations, large office and factory entrances. The flaps retract into the housing, clearing the entire 600 mm passage, so people walk through almost without delay — with bags, suitcases and in a dense flow. The housing is made of SUS304 stainless steel, resistant to intensive use; the module weighs 100 kg with dimensions of 1360×280×980 mm.
Passage is authorized by card, QR code or biometrics — readers and access control (ACS) controllers are built into the housing, while sensors track attempts to tailgate behind another person. The operating range from −20 to +60 °C and permissible humidity of 5–90% allow installing the gate not only indoors but also outdoors under a canopy. Power comes from AC mains at 100–120 / 200–240 V, 50/60 Hz.
Advantages
- Flaps hide into the housing — the passage opens fully
- High actuation speed for a dense flow of people
- SUS304 stainless steel built for intensive use
- 600 mm passage width — convenient with bags and luggage
- Operation from −20 to +60 °C, outdoor installation under a canopy
- Identification by card, QR code or biometrics
Applications
- Railway stations and transport hubs
- Business centers with a large workforce
- Stadiums and concert venues
- Large factory entrance checkpoints
- Universities and campuses
Installation and setup
The gate is anchored to a level concrete base; cable ducts for power and ACS lines are laid under it at the design stage. A passage is formed from two or more modules, adding a wider lane for visitors with limited mobility where needed. Card readers, QR scanners or biometric terminals are mounted into the housing, after which the gate is linked to the access control controller and the modes are configured: passage direction, opening time, response to unauthorized attempts. The emergency scenario must be tested — on power loss the flaps retract and the evacuation route stays clear. SAT Solutions delivers entrance checkpoints turnkey: ZKTeco gates from the Tashkent warehouse, the ACS, installation and commissioning by our own engineers.
Frequently asked questions
How does a flap barrier differ from a swing gate?
How does the gate react to two people passing together?
What happens on an emergency shutdown?
Can the FBL500 be installed outdoors?
Product reviews
Questions & answers
