Security alarm systems

Service

Security Alarm Systems in Tashkent: Home, Office, Warehouse

Security alarm systems for apartments, houses, offices, warehouses and shops: wireless Hikvision AX PRO kits with no wall chasing for the home, wired and hybrid Bolid loops with partitions by department for business, a cashier's panic button, output to a monitoring station and integration with access control and CCTV.

Free
site visit in Tashkent
1 day
quote and estimate
3 years
warranty on installation
Hikvision AX PRO wireless kit: hub and sensorsfrom 2,189,900 UZSEstimate the cost →

What's included

Scope of work

  • Site survey, kit selection and division into alarm partitions
  • Motion, door, glass-break and water-leak detectors; Bolid loops and wireless Hikvision AX PRO
  • Night and away modes, pet immunity; rights by department and shift, full event log
  • Phone alerts, battery backup and a GSM channel; panic button and output to a monitoring station
  • Integration with access control and CCTV, installation in 1–2 days, training and a maintenance contract

Burglar Alarm for Apartments and Private Houses in Tashkent

At home an alarm exists for one purpose: so that you learn about a stranger inside before he can carry anything out, and so that you are not the only one who learns it. SAT Solutions installs alarms in apartments, private houses and country cottages — from a panel with three detectors in a one-room flat to a two-storey house with a garage, an attic floor and a separate gate. The residential task is built differently from the workplace one: there is no duty officer, no shifts and nobody whose job it is to hand the premises over to guarding, so the system has to forgive forgetfulness rather than punish it with needless noise.

When the finishing work is already done, we take a wireless kit — the Hikvision AX PRO line. Detectors hold on two screws or an adhesive plate, no cable is pulled through the living space, no walls are chased, wallpaper and tiles stay intact. The radio link is encrypted and acknowledges every message: if a detector stops answering, the panel says so instead of silently assuming that all is well. When the house is still being built and the walls are open, it is more honest to lay a cable loop in conduit — then no batteries are needed at all and nothing shows on the surface except the detectors themselves.

The set of detectors is assembled around how people actually get into a home. In a flat that means the entrance door and, on a low floor or next to a fire escape, the windows: a magnetic contact detector on the leaf fires at the moment it is opened. A room as a whole is covered by a volumetric infrared detector, a long corridor by a narrow-beam one so that it does not react to glare from a window. A house with panoramic glazing and a veranda gets an acoustic glass-break detector: it reacts to a pair of sounds — the dull impact and the ring of falling shards — so the alarm goes out before anyone climbs through the frame.

The same panel takes household detectors, which in a home trigger far more often than the anti-theft ones. A leak detector under the sink, beside the washing machine and in the bathroom catches water in the first seconds and, with motorised valves fitted, shuts the supply off by itself; repairs for the neighbours below cost more than the whole system. A smoke detector in the hallway and the kitchen wakes you at night and sends a notification even when nobody is home. A dog or a cat is no obstacle: pet-immune detectors rated for animals up to 20-25 kg ignore movement near the floor and will not turn your holiday into a stream of empty alarms.

Home modes are configured once and then need no attention. Night mode drops the rooms where you sleep and keeps the hallway, the kitchen, the staircase and the ground floor under watch: you walk to the kitchen for water and the system stays quiet, while an opened entrance door still raises the alarm. Away mode turns everything on, volumetric detectors included. Switching is done with a fob by the door, a code on the keypad or from the app — you can set the home from the car if you remember it halfway there. The app shows more than alarms: you see who disarmed and at what time, which is how parents learn that a child is back from school.

A power cut and a broken internet link are planned for in advance. The panel has its own battery: when 220 V disappears it keeps running for another 12-24 hours depending on the model and the number of detectors, and it sends a power-failure notification straight away. The communication path is backed up by mobile: a SIM card goes into the panel, and if Wi-Fi fails the signal leaves over the cellular network; if that drops too, the event is stored and arrives once the link returns. Batteries in wireless detectors last two to three years on average, the panel warns in advance about each one running low, and replacement takes a minute — we show how it is done when we hand the site over.

We separately agree what happens if the owner has not seen the notification. Trusted people are added to the app: a spouse, grown-up children, parents, a neighbour with a key. The alarm reaches all of them at once rather than in turn, and each of them can see who has already responded. The indoor siren works less on passers-by than on the intruder himself: staying in a room with 105 decibels is physically hard, and in most cases the person leaves empty-handed. A private house also gets an outdoor siren with a strobe, which marks the right address for whoever drives up.

Installing an apartment fits into a single working day, app setup and a walkthrough for the family included; a private house with a garage and a gate usually takes two. We price the job after an engineer's visit: the number of detectors, the panel type and whether an outdoor part is needed all affect it. The warranty covers the equipment we supplied and the work we did; scheduled maintenance covers the systems we installed ourselves and the equipment we supplied — for the rest we offer an audit and an upgrade. Requests are accepted on weekdays from 9:00 to 18:00 and answered within the working day. If what needs guarding is an office, a warehouse or a shop, the task there is arranged differently — that is what the next section is about.

Security Alarm for Offices, Warehouses and Shops

On a commercial site an alarm answers a management question. There are people with financial liability, keys to the till and the trading floor, a night shift, cleaners and contractors — and the question after an incident is not whether someone broke in but who disarmed the site at 04:12 and on what grounds. So for an office, a sales area, a warehouse or a workshop we build a system with three mandatory properties: rights separated between departments, a log that can be used as documentation, and a written response procedure known to the guards and to the staff alike. Such sites rest on wired and hybrid loops: cable does not depend on batteries or radio interference, and across thousands of square metres, among metal racking and running machinery, that argument decides the matter. Where documentation is submitted to supervisory authorities we use Bolid devices — the Signal-20P panel on compact sites and the S2000 line with addressable expanders where there are many loops and every detector must be tied to a specific room. During expansion the trunk stays wired, while an annexe or a newly rented block is picked up by a radio expander without opening up the finishes; a small office or shop can also run on the wireless Hikvision AX PRO — the same line as for the home, but with partitions and personal staff codes.

Partitions describe a structure of responsibility, not convenience. Accounting, the server room, the finished-goods store and the trading floor become separate partitions, each with its own list of who may arm and disarm it: a storekeeper cannot disarm the cash zone, a salesperson cannot open the warehouse, and a shift supervisor reaches the common areas but not the safe room. With shift work this immediately answers the contested question: the partition was armed, a specific code disarmed it at a specific minute, and a specific crew took over the shift. The event log here is not a service line in an interface but a document used when an incident is examined: the device records every arming and disarming with the user code, the partition number and the time to the second, along with detector tamper openings, loop faults and power losses. In a shortfall case or a dispute with a tenant, a selection for the required period is matched against card passages and the video archive — that is usually enough to take the emotion out of the conversation. The log is kept on the device itself and on the site server, with the depth set to the security department's requirements.

A panic button at the till and in the manager's office is installed together with a written procedure, otherwise it is useless. Pressing it must be covert and silent on site: the intruder must not realise that help has been called, so the fixed button is mounted under the counter and the staff with financial liability get wearable fobs. The procedure sets out who presses it, what the rest of the staff do — no arguing, no chasing, step away from the till — whom the manager calls, and how the crew tells a real call from an accidental one, by a code word on the call back. We brief the staff at handover and again on the client's request.

A link to a monitoring station turns an alarm into a dispatch. The chain looks like this: the device passes the signal to a private security company's station over two independent channels, the operator opens the site record and sends the nearest crew, the usual arrival target within the city is five to ten minutes, and the crew leader inspects the perimeter and the entry points and writes an inspection statement. The client's responsible representative is called at the same moment as the dispatch, so that the premises are opened with the crew present rather than alone. The contract with the security company is signed by the site owner; our part is to prepare the device technically, program the transmission channels and take part in the scheduled link tests.

Tying the alarm to CCTV and access control removes the biggest cost item — false dispatches. Every device event marks the matching fragment of the archive, and the operator sees within a minute what it was: a draught moving a banner, or a person in the room. On the access side the logic runs the other way: the last employee taps a card on the way out and the site arms itself, while an attempt to open a door with a card inside an armed zone is blocked until it is disarmed. On a site of several buildings all of this comes together at one guard post with a shared plan and a single event list. A working system rests on a routine: under a service contract we check the detection zones, loop resistance, battery capacity, the passage of a test signal to the monitoring station and the currency of the user list once a quarter — codes of people who have left are deleted, which is the most common hole. We service what we installed ourselves and equipment we supplied; for systems installed earlier by others we run an audit and an upgrade, after which the site goes onto scheduled maintenance. We install across Uzbekistan, take enquiries on weekdays from 9:00 to 18:00, and reply within the working day.

Standard solutions

Three standard intruder alarm setups

We price every site individually: send the floor plan and the number of entrances, and we return a quote with an exact estimate within one business day.

Apartment or private house

House, country home, apartment, garage

  • Contact sensors on doors and windows, motion detector inside
  • Siren and a phone alert when the alarm trips
  • Wireless sensors — no chasing walls, no cabling
  • Arm and disarm from the app or with a key fob

Timeline: 1 day

Shop, office, warehouse

Retail unit, office, warehouse, pharmacy

  • Motion, contact and glass-break sensors around the perimeter
  • Panic button at the till and at workstations
  • Separate codes per employee — you can see who disarmed it
  • Signal relayed to a security company control room

Timeline: 1–3 days

Plant and grounds

Factory, depot, logistics complex

  • Split into zones: shop floor, warehouse, office, perimeter
  • Tied into CCTV — an alarm brings up the right camera
  • Tamper detection on cabinets and plant rooms
  • Log of alarms and arming with a report for any period

Timeline: by project, from 1 week

How we work

From request to a protected site — 5 steps

1

Engineer visit

we walk the site, entrances and blind spots — free of charge

2

Zone design and quote

sensors, panel, alarm scenarios, itemised estimate — within one business day

3

Installation

wireless sensors without chasing walls, wired ones in tidy runs

4

Setup

scenarios, staff codes, alerts to phone and to the control room

5

Handover and service

we teach arming and disarming; warranty on equipment and work

Equipment

Intruder alarms — in stock in Tashkent

Hikvision AX PRO — wireless sensors and panels, all equipment supplied by us with warranty.

What a security alarm costs

Equipment prices come from the catalogue and update automatically. Installation depends on the number of sensors and partitions: an apartment is one visit, a warehouse means wired loops, shift partitions and a monitoring-station link. Send a floor plan or room count and we return a quote within one business day.

How it works

How the system works

1Detectorsmotion, windows, doors
2Control panelalarm analysis
3Notificationsiren, SMS, call

Equipment we install

Hikvision DS-PDPC12P-EG2-WB( wireless motion detector with camera
Hikvision DS-PDPC12P-EG2-WB( wireless motion detector with camera
Hikvision DS-PDPC12P-EG2-WB wireless motion detector with camera for AX PRO: PIR sensor and video verification of alarms with a snapshot and IR illumination. With warranty.
939 900 UZS
Bolid S2000-IPG Gas Fire Detector (CO)
Bolid S2000-IPG Gas Fire Detector (CO)
CO gas detector: finds smouldering long before visible smoke appears.
865 900 UZS
Dahua DHI-ARD2251E-W2(868V) wireless PIR camera
Dahua DHI-ARD2251E-W2(868V) wireless PIR camera
Dahua wireless outdoor PIR camera (compatible only with the ARC3800H series) > Supports anti-masking detection. > Supports motion detection to prevent the device from being moved or disconnected by anyone. > Supports video
1 697 900 UZS
Hikvision DS-PDPC12PF-EG2-WB wireless motion detector with color camera
Hikvision DS-PDPC12PF-EG2-WB wireless motion detector with color camera
Motion detector with a ColorVU color camera and white illumination
1 112 900 UZS
Bolid DIP-34A-04 Addressable Analogue Smoke Detector
Bolid DIP-34A-04 Addressable Analogue Smoke Detector
The mainstream version of the Bolid addressable smoke detector for Orion systems.
395 900 UZS
Dahua DHI-ARA14-W2(868) wireless siren
Dahua DHI-ARA14-W2(868) wireless siren
Wireless siren for indoor communication > Two-way communication via radio frequency transmission. > High-decibel sound signal. > Various alarm sounds: fire, medical assistance, intrusion, panic and others. > Configurable
652 900 UZS
Hikvision DS-PDMCS-EG2-WB( wireless magnetic contact
Hikvision DS-PDMCS-EG2-WB( wireless magnetic contact
Hikvision DS-PDMCS-EG2-WB wireless magnetic contact with a reed switch for monitoring doors and windows in the AX PRO security system. Buy in Tashkent.
197 900 UZS
Bolid DIP-34A-05 Addressable Analogue Smoke Detector
Bolid DIP-34A-05 Addressable Analogue Smoke Detector
Addressable analogue smoke detector: the panel sees not just an alarm but the dust level too.
469 900 UZS

Examples

Gallery

Next step

Ready to discuss your site?

An engineer visits sites in Tashkent free of charge; we send the estimate and quote within one business day.

How we work

SAT Solutions terms of work

3-year warranty on installation

Installation work is covered for 3 years; equipment for 1 to 3 years per the manufacturer. Warranty visits within one business day.

In-house installation team

3 engineers and 15 installers on staff, no subcontractors. We work in Tashkent and across Uzbekistan.

Engineer on site the same day

Site visits in Tashkent are free and happen on the day you call. Regions by arrangement.

Free estimate and quotation

After the survey we prepare an estimate and a commercial proposal within one business day. No obligation.

Contract, VAT, paperwork

Contract with a legal entity, invoice, VAT-compliant billing, acceptance acts and as-built documentation. We also work with private clients.

Installation permits

Security systems installation — National Guard of Uzbekistan permit No. 1554491. Fire alarm and evacuation systems — Ministry of Emergency Situations permit No. 913518. View permits

Questions & answers

Frequently asked questions

How long does it take to install an alarm in an apartment?
A wireless kit goes in within a day: the hub, contacts on the front door and windows, a motion detector in the hallway and a siren. There is no need to chase walls or spoil the finishes — detectors are fixed with adhesive pads or a couple of screws.
Will the alarm go off because of a cat or a dog?
In homes with pets we use motion detectors immune to animals up to 20–25 kg and lay out the zones so the pet's usual path stays outside the detection area. Nothing puts people off using an alarm faster than false alerts.
What happens if the power or the internet goes down?
The hub runs for several hours on its backup battery, and the detectors work for years on their own batteries and report a low charge themselves. If the internet drops, the alarm goes out over the GSM channel — to the owner's phone and to trusted contacts.
How do you split security between departments and shifts?
The site is divided into partitions: sales floor and back room, warehouse and office, leased units separately. Each partition has its own rights and its own list of staff allowed to arm and disarm it, and the log shows who did it and when.
What does connection to a monitoring station give?
A physical response: an alarm sends a patrol crew from the security company, and the callout and its time are recorded. The response procedure — who comes, within what time and what they check — is written into the contract with the security company; we are responsible for transmitting the signal and for its reliability.
Why link the alarm to access control and CCTV?
So that an event can be examined instead of guessed at. A trigger is tied to the video recording, arming is tied to the entrance — the last employee leaves and the site arms itself. A log with video becomes evidence when a shortage or an incident is investigated.

Useful articles

Rate our work
Tap the stars