ZKTeco FBL700 flap barrier
High-throughput ZKTeco flap barrier for business centers, stations and large offices. The flaps retract into the housing; passage is confirmed by card, QR code or biometrics.
This equipment is supplied per project: the price depends on configuration and volume. We will send a quote within one business day.
- Weight, kg
- 83
- Power
- AC 100–120 V / 200–240 V, 50/60 Hz
- Humidity
- 5% to 80%
- Dimensions, mm
- 1200 * 280 * 980 (L * W * H)
- Housing material
- SUS304 stainless steel
- Passage width, mm
- 600
- Operating temperature
- -20°C to 70°C
- Operating conditions
- indoor / outdoor (if sheltered)
The ZKTeco FBL700 is a speed flap barrier for entrances with heavy foot traffic: business centers, railway stations, large offices. It is the lightweight version of the line: 83 kg versus a hundred for the larger model, dimensions of 1200 × 280 × 980 mm and the same 600 mm passage width. The flaps retract into the housing, clearing the lane in a fraction of a second, while identification is done by card, QR code or biometrics. The SUS304 stainless steel body is built for years of intensive use.
An operating range from −20 to +70 °C and 5–80% humidity tolerance allow installation not only in a lobby but also outdoors under a canopy. Power is universal: AC 100–120 V or 200–240 V, 50/60 Hz. The barrier integrates into the ZKTeco access control ecosystem: controllers, readers and face recognition terminals run on a single platform with time attendance. We supply the equipment from our Tashkent warehouse, design entrance lanes and install turnstiles turnkey.
Advantages
- Smaller size and weight (83 kg) with the same 600 mm passage width
- Extended temperature range from −20 to +70 °C
- Flaps retract into the housing for fast passage
- SUS304 stainless steel for long service life
- Outdoor installation possible under a shelter
- Universal power: AC 100–120 / 200–240 V, 50/60 Hz
Applications
- Office lobbies with limited floor space
- Entrances with dense rush-hour flow
- Educational and medical institutions
- Sports and entertainment venues
- Business centers and railway stations
Installation and setup
A level base is prepared for the barrier with embedded anchors and ducts for power and control cables. Housings are lined up to form lanes, each 600 mm wide, with railings closing the line at the ends. Card readers, QR scanners or face recognition terminals are mounted on the housing and wired to the access controller, where modes are configured: free passage, ID-only, emergency release. For outdoor installation a canopy protecting the mechanism from precipitation is mandatory. Before launch, flap sensors and the reaction to an unauthorized passage attempt are verified.
Frequently asked questions
How does the FBL700 differ from the FBL500?
How many people pass per minute?
Is maintenance required?
What happens during a power outage?
Product reviews
Questions & answers
