● Components & Accessories In stock
WDM SFP Module 1.25G, LC Simplex, Single-Mode, up to 3 km
SFP LC3km
Single-fiber WDM SFP module, 1.25 Gbit/s, LC simplex connector: single-mode fiber, reach up to 3 km, works as an A/B pair.
▸
Type
WDM SFP transceiver (BiDi)
▸
Speed
1.25 Gbit/s
▸
Fiber
single-mode, 1 fiber
▸
Connector
LC simplex
Specifications
- Type
- WDM SFP transceiver (BiDi)
- Speed
- 1.25 Gbit/s
- Fiber
- single-mode, 1 fiber
- Connector
- LC simplex
- Transmission range
- up to 3 km
- Pairing
- matching A/B modules with opposite wavelengths
- Hot swap
- yes
Description
The LC3km SFP module is a single-fiber gigabit WDM (BiDi) transceiver for single-mode fiber links up to 3 km long. Transmit and receive share one fiber on different wavelengths, so the module connects with a single LC simplex patch cord. WDM modules work in pairs: the ends of the line take matching A and B modules with opposite transmit and receive wavelengths. This scheme saves fibers in the cable: one 1.25 Gbit/s channel uses just one fiber. Please check pairing and kit contents with SAT Solutions specialists in Tashkent.
Advantages
- One fiber per channel — half as many fibers occupied as with dual-fiber modules
- 1.25 Gbit/s speed — a gigabit channel for IP video surveillance, access control and office networks
- Reach up to 3 km — distances within a campus, plant or residential complex
- LC simplex connector — compact connection with a single-fiber patch cord
- Standard hot-swappable SFP form factor — installed without powering down the switch
- The optical channel is immune to electromagnetic interference and lightning-induced surges
Applications
- Links between buildings of a plant, educational or medical complex
- Connecting checkpoints, warehouses and remote video surveillance posts
- Lines in cables with few spare fibers
- On-site networks of industrial facilities with strong interference
Frequently asked questions
Which module is needed at the other end of the line?
The matching module of the WDM pair with opposite wavelengths: the transmit wavelength of one side equals the receive wavelength of the other. That is why a pair always consists of an A module and a B module; please check the selection with SAT Solutions specialists.
What fiber and patch cord are required?
Single-mode fiber and a single-fiber LC simplex patch cord; an LC-SC patch cord is used for a patch panel with SC ports.
Are tools needed for installation?
The module is pushed into the SFP slot by hand until the latch clicks and supports hot swapping. SAT Solutions provides turnkey installation of fiber optic lines.
💬
Need help choosing?
Our engineer will pick the right equipment for your needs and send a quote within one business day.
Product reviews
Questions & answers
Similar: Fiber & accessories
Whole category →
SFP Module 1.25G LC Duplex, Single-Mode, 1310 nm, up to 20 km
from 122 900 UZS
WDM SFP Module 1.25G, SC, Single-Mode, up to 20 km
from 221 900 UZS
WDM SFP Module 1.25G, SC, Single-Mode, up to 3 km
from 122 900 UZS
19″ 1U optical patch panel (ODF) for 24 SC ports, black, fixed
from 244 900 UZS
19″ 1U optical patch panel (ODF) for 48 fibers (24 LC duplex), fixed
from 408 900 UZS
Wall-mount optical termination box for 8 SC/LC ports, metal, with splice cassette
from 146 900 UZS
Frequently bought together
Optical adapter Pixietech ST-ST SM
from 12 190 UZS
Cable tag 153 (small square) (pack of 250)
from 72 190 UZS
Attenuator PXT-ATT-FF-SC-05dB (Female-Female)
from 25 090 UZS
Plastic alcohol dispenser with pump PXT-ADB-08
from 66 290 UZS
PLC Splitter 1×8 SC/UPC
from 98 190 UZS
"Collar" anchor for nylon cable ties, 6 mm, 100 pcs
from 83 090 UZS