Remote start device QR Systems UDP 513-02D (smoke extraction)

Remote start device QR Systems UDP 513-02D (smoke extraction) — фото 2

Remote start device QR Systems UDP 513-02D (smoke extraction)

Addressable wireless RF 868 MHz remote start device for manual start of the smoke extraction system: CR123A and CR2032 batteries, range up to 900 m, XTEA 128-bit encryption.

383 900 UZS

Telegram WhatsApp

▸

Type

remote start device, addressable wireless (smoke extraction)

▸

Interface

RF 868 MHz, 5 channels, radiated power up to 25 mW

▸

Communication range

up to 900 m in open terrain

▸

Encryption

XTEA 128-bit

Specifications

Type: remote start device, addressable wireless (smoke extraction)
Interface: RF 868 MHz, 5 channels, radiated power up to 25 mW
Communication range: up to 900 m in open terrain
Encryption: XTEA 128-bit
Power supply: main 3 V, CR123A 1500 mAh; backup 3 V, CR2032 210 mAh
Battery life: main at least 3 years, backup at least 3 months
Pressing force: at least 25 N
Address slots: 1
Operating temperature: −10 to +55 °C, humidity up to 93 % at +40 °C
Housing: IP20, 85×85×40 mm, max. 116 g

Description

The QR Systems UDP 513-02D remote start device is an addressable wireless device for manual start of the smoke extraction system in a QR Systems addressable fire alarm system. When the actuator is pressed with a force of at least 25 N, the device sends a signal over the RF 868 MHz radio channel to the control panel or, via the RR-02-250 radio expander, to the KS-02-250 system controller. Power is autonomous: a main CR123A battery and a backup CR2032 battery, both monitored by the system. The device occupies one address slot, is detected in the system automatically and is intended for QR Systems addressable systems with wireless devices.

Advantages

RF 868 MHz radio channel, 5 channels, range up to 900 m in open terrain — communication with the panel without a wired line
Protection against accidental activation: operates at a pressing force of at least 25 N — starts only on a deliberate press
Two batteries: main CR123A (1500 mAh) for at least 3 years, backup CR2032 (210 mAh) for at least 3 months — both monitored
XTEA 128-bit signal encryption — protected radio exchange with the panel
Housing tamper monitoring (removal sensor) and LED status indication — device status visible on site
Automatic detection in the system, service mode, 1 address slot — simple setup and maintenance

Applications

Manual start of smoke extraction systems in a QR Systems addressable system
Wireless fire alarm systems based on QR Systems PPK panels and the RR-02-250 radio expander
Sites with the KS-02-250 system controller
Buildings where the smoke extraction start button is connected without a wired line
Extending existing QR Systems systems with wireless devices

Frequently asked questions

How does UDP 513-02D differ from UDP 513-02A and UDP 513-02P?

The versions differ in purpose and marking: A — emergency exit, D — smoke extraction, P — fire suppression. The radio channel, power supply, housing and other parameters are the same for all three versions.

Which equipment does the device work with?

With a QR Systems addressable analogue fire control panel and, via the RR-02-250 radio expander, with the KS-02-250 system controller. Communication is over the RF 868 MHz radio protocol, range up to 900 m in open terrain.

How long do the batteries last and what is included?

The main CR123A battery lasts at least 3 years, the backup CR2032 at least 3 months (at temperatures above 0 °C and a polling interval of 255 s). Both batteries are pre-installed; the kit also includes an extractor key and a mounting set.

🛠Turnkey serviceFire Alarm and Fire Suppression Installation in Uzbekistan — design and installation→

💬

Need help choosing?

Our engineer will pick the right equipment for your needs and send a quote within one business day.

Get a consultation →