Spiral tension clamp PXT-НСО-4-10,6/11,6

Pixietech НСО reinforced spiral clamp for heavy optical cables 10.6-11.6 mm on aerial lines. High holding force, buy in Tashkent.

от 15 100 сум

🌙

Артикул

PXT-НСО-4-10,6/11,6

✅

Гарантия

1 год

Specifications

Артикул: PXT-НСО-4-10,6/11,6
Гарантия: 1 год

The Pixietech PXT-NSO-4-10.6/11.6 spiral tension clamp is designed for tension fixation of heavy self-supporting optical cables with a diameter of 10.6 to 11.6 mm on supports of aerial communication lines. The enlarged cross-section of the spiral provides the high holding force required for working with large-size cables on long spans. This model is used on trunk and distribution sections of communication lines with increased mechanical requirements.

Advantages

Designed for cables with a diameter of 10.6–11.6 mm — a common size of trunk self-supporting optical cables
The increased length and diameter of the spiral provide the high holding force required for loaded spans
Even distribution of the load along the entire gripping length prevents deformation of the cable sheath and core
Installation without special tools reduces the mounting time on the support
Resistance to atmospheric effects: UV radiation, precipitation and temperature fluctuations
Manufacturer's warranty 1 year

Applications

Fixation of heavy trunk self-supporting optical cables ADSS on long-distance communication lines
Tension fittings on corner, end and intermediate supports of high-voltage and communication lines
Installation of inter-site fiber-optic lines for enterprises and infrastructure facilities
Construction of a backbone optical network for communication operators in Uzbekistan

Частые вопросы

How to make sure that the cable diameter falls within the range of this clamp?

Measure the outer diameter of the cable in several places; the value should be in the range of 10.6–11.6 mm. If in doubt, contact SAT Solutions specialists.

Can the clamp be used on cables with a dielectric load-bearing element (ADSS)?

Yes, spiral clamps of this type are suitable for ADSS cables and similar self-supporting constructions without a metal core.

How is the clamp fastened to the support?

The clamp is connected to the fastening node on the support via a thimble or mounting bracket; the exact scheme depends on the type of support and fittings used.

🛠Turnkey serviceСКС и ЛВС — design and installation→

💬

Need help choosing?

Our engineer will pick the right equipment for your needs and send a quote within 30 minutes.

Get a consultation →

Similar: Fiber & accessories

Whole category →