Addressable analogue wireless smoke detector QR Systems IP 212-02/Wh
Wireless smoke detector RF 868 MHz, white: CR123A and CR2032 batteries, 3+ years of operation, range up to 900 m, sensitivity 0.05–0.2 dB/m, XTEA 128bit.
Specifications
- Type
- optical point smoke detector, addressable analogue, wireless
- Interface
- RF 868 MHz, 5 channels
- Address slots
- 1
- Power supply
- main CR123A 3 V 1500 mAh; backup CR2032 3 V 210 mAh
- Operating time
- main at least 3 years, backup at least 3 months
- Radio range
- up to 900 m in open terrain, power up to 25 mW
- Sensitivity
- 0.05–0.2 dB/m
- Encryption / tamper
- XTEA 128bit / removal sensor yes
- Operating temperature
- −10…+55 °C
- Housing
- IP20, Ø92×42 mm, 105 g, white
Description
The QR Systems IP 212-02/Wh optical point addressable analogue wireless smoke detector is designed for early detection of fires accompanied by low-concentration smoke in enclosed rooms and for transmitting the Fire signal and its own status signals to QR Systems controllers. Communication with the panels is over the RF 868 MHz radio protocol with XTEA 128bit encryption; the detector occupies one address slot and is identified in the system automatically. Power comes from a main CR123A battery (1500 mAh) and a backup CR2032 (210 mAh) with an operating time of at least 3 years and 3 months respectively, and the state of both cells is monitored. The detector is used with the addressable analogue fire control panel and, via the RR-02-250 radio expander, with the KS-02-250 controller. Version Wh has a white housing; the detector is chosen for sites where running wired lines is undesirable or difficult.
Advantages
- RF 868 MHz radio, 5 channels, range up to 900 m in open terrain — installation without laying a communication line
- Main CR123A battery for at least 3 years, backup CR2032 for at least 3 months — infrequent replacement, both cells monitored
- Sensitivity 0.05–0.2 dB/m and dust monitoring — early smoke detection and information on chamber contamination
- XTEA 128bit encryption and automatic identification in the system — protected communication and simple setup
- Tamper (removal sensor) and Test button — removal from the base is monitored, testing on site
- Over-the-air update technology, MB-2 mounting base included, average service life 10 years
Applications
- Wireless QR Systems addressable analogue fire alarm in enclosed rooms
- Buildings with finished interiors where cabling is undesirable
- Historic buildings, museums and hotels with interiors that must remain intact
- Rented offices and retail premises with frequent re-planning
- Extending a wired QR Systems system with wireless detectors via RR-02-250
Frequently asked questions
Which panels does the detector work with?
How long does the detector run on batteries?
How does IP 212-02/Wh differ from IP 212-02?
Product reviews
Questions & answers
