QR Systems IP 513-102 addressable manual call point
Addressable manual call point with a built-in short-circuit isolator and tamper switch: loop-powered, 1 address slot, actuation force no less than 25 N, up to 50 devices per loop.
Specifications
- Type
- addressable manual call point
- Interface
- PLS
- Power supply
- from the PLS loop
- Current consumption
- no more than 0.16 mA (standby), 0.2 mA (Fire)
- Address slots
- 1
- Devices per loop
- no more than 50 (including the non-addressable BI-04)
- Short-circuit isolator
- built-in, activation 10 V, restore 3 V, current up to 1 A
- Tamper switch
- yes
- Actuation force
- no less than 25 N
- Operating temperature
- −25…+55 °C, humidity up to 93 % at +40 °C
- Protection rating
- IP20
- Dimensions
- 85 × 85 × 40 mm
- Weight
- no more than 95 g
- Average service life
- 10 years, 60 000 h MTBF
Description
The QR Systems IP 513-102 addressable manual call point is intended for manually raising a Fire signal in a QR Systems addressable fire alarm system. It is used with the addressable analogue fire control and indicating panel and the KS-02-250 system controller; communication and power are over the wired PLS loop, and the call point occupies one address slot in the system. The device has a built-in short-circuit isolator: on a short circuit in the loop the isolator activates at 10 V and restores at 3 V, cutting off the damaged section. The housing is protected against accidental activation, has a tamper switch and LED status indication; the call point is detected automatically in the system, measures the PLS voltage at its installation point and can be switched to service mode without losing its binding. Up to 50 devices can be connected to one PLS loop (including the non-addressable BI-04).
Advantages
- Built-in short-circuit isolator — damage to one section of the loop does not stop the other devices
- Protection against accidental activation and actuation force no less than 25 N — no false alarm from an accidental touch
- Housing tamper switch — the panel learns of any attempt to open the call point
- Automatic detection in the system and service mode without losing binding — fast commissioning and simple maintenance
- PLS voltage measurement at the installation point — loop diagnostics without additional instruments
- Current no more than 0.16 mA in standby and 0.2 mA in fire, 10-year service life — economical, long operation
Applications
- Escape routes, corridors and exits of office and administrative buildings
- Shopping centres, hotels and public buildings
- Educational and medical facilities
- Production and warehouse sites
- Sites with a QR Systems addressable fire alarm system based on the panel and the KS-02-250 controller
Frequently asked questions
Why does a manual call point need a built-in isolator?
How many call points can be placed on one loop?
How is the call point reset after it has been pressed?
Product reviews
Questions & answers
