QR Systems MK-2 switching module
QR Systems MK-2 switching module — фото 2
● QR Systems In stockNew

QR Systems MK-2 switching module

Line supervision module for dry contacts of control cabinets: open and short-circuit supervision, 30 V DC, 0 addresses, 20×10×4 mm.

17 990 UZS
▸
Type
switching module, dry-contact line supervision for open and short circuit
▸
Application
with the QR Systems control panel and KS-02-250 controller
▸
Operating voltage
30 V DC maximum
🌙
Current under short circuit
7.5 mA

Specifications

Type
switching module, dry-contact line supervision for open and short circuit
Application
with the QR Systems control panel and KS-02-250 controller
Operating voltage
30 V DC maximum
Current under short circuit
7.5 mA
Address slots
0
Wire cross-section
0.35 mm²
Operating temperature
−25…+55 °C
Protection rating
IP30
Dimensions
20×10×4 mm (without wires)
Weight
up to 3 g

Description

The QR Systems MK-2 switching module supervises the line from the dry contacts of control cabinets and other process equipment connected to the outputs of the addressable control panel and the KS-02-250 system controller. The module's purpose is to supervise the circuit for open and short circuit, so the panel receives a reliable state of the line up to the equipment contact. The ultra-compact 20×10×4 mm body, excluding wires, fits in confined spaces, right at the cabinet terminals. The module takes no address slots, so the panel capacity stays available for detectors. Connection is by wire leads of 0.35 mm² cross-section according to the passport diagram: panel output and the equipment dry contact.

Advantages

  • Open and short-circuit supervision — a line fault up to the dry contact is visible on the panel
  • Current consumption under short circuit 7.5 mA — low load on the panel output
  • 20×10×4 mm and up to 3 g — installation in confined spaces at the equipment terminals
  • 0 address slots — saves the panel's address capacity
  • Temperature range −25…+55 °C — operation in unheated rooms
  • Protection rating IP30 — for installation inside a cabinet or junction box

Applications

  • Supervising lines from the dry contacts of building equipment control cabinets
  • Connecting process equipment to a QR Systems addressable system
  • Monitoring the state of actuators on the outputs of the KS-02-250 controller
  • Sites with unheated areas: warehouses, car parks, technical rooms

Frequently asked questions

How does the MK-2 differ from the MK-1?
The MK-1 supervises the line from audible and visual alarm devices, while the MK-2 supervises the line from the dry contacts of control cabinets and other process equipment. The dimensions, protection rating and temperature range of the two modules are the same.
What exactly does the module supervise?
The circuit for open and short circuit. The module's current consumption under short circuit is 7.5 mA, the maximum operating voltage is 30 V DC.
Does the module occupy an address and how is it connected?
The module takes no address slots. It is connected by wire leads of 0.35 mm² cross-section between the panel output and the equipment dry contact according to the passport diagram.
🛠Turnkey serviceFire Alarm and Fire Suppression Installation in Uzbekistan — design and installation→
💬
Need help choosing?
Our engineer will pick the right equipment for your needs and send a quote within one business day.
Get a consultation →

Product reviews

Rate our work
Tap the stars

Questions & answers

Ask the engineer

Compatibility, installation, selection — we'll answer and publish the reply on this page.